* 2024 Bobcat MT100 Mini Track Loader
* 1 Hour
* Bob-Tach Interface
- Uses an over-center latch mechanism and wear-compensating pins to make proper attachment to carrier fitment.
* Wide Tracks
- Wide Track Option added 10" wide track, wide undercarriage, and changes loader width to 44"
* 44" General Purpose Bucket
Standard Features
* 25 HP Tier IV Diesel Engine
* Auxiliary Hydraulics
* Attachment Interface Bob-tach or CII (to accept approved attachments)
* Built-In Tie Down & Crane/Lift Locations
* Continuous Flow Shutoff Lever
* Hydrostatic Drive Train
* Counterweights - Includes (4) 30 pound weights
* Instrumentation
- Hourmeter
- Engine Temperature & Fuel Gauges
- Voltmeter & Warning Lights
* Lift Arm Lockout with Manual Bypass
* Lift Arm Support
* Neutral Start Interlocks
* Parking Brake
* ISO Pattern Joystick Travel Control
* Spark Arrestor Muffler
* Tilt Lockout
* Tilt Steering
* Storage Cubby
* Cup Holder
* Tracks: Rubber, 7.1" Wide
- Machine Width: 35.6"
ENGINE
* Emissions Tier (EPA): Tier 4
* Engine Model: D902-E4B-BC-1
* Engine Make: Kubota
* Engine Cooling: Liquid
* Engine Fuel: Diesel
* Displacement: 55" cubic
* Number of Cylinders: 3
* Horsepower: 24.8hp
PERFORMANCE
* Rated Operating Capacity: 1,000 lb
* Carry Position ROC with Standard Counterweight-UnderCarriage Position: 1,300 lb
* Tipping Load: 2,898 lb
* Operating Weight: 3,390 lb
* Ground Pressure: 5.25 psi
* Travel Speed: 4.1 mph
* Travel Speed - Reverse: 2.9 mph
CAPACITIES
Fuel Tank: 7 gal
HYDRAULIC SYSTEM
** Pump Capacity: 12 gal/min
* System Relief @ Quick Couplers: 2,900 psi
* Auxiliary Standard Flow: 12 gal/min
GENERAL
* Contract Codes: Mini-Track Loader
* First Year of Production: 2020
CONTROLS
* Vehicle Steering: Other
* Lift & Tilt: Controlled by joystick
* Auxiliary Hydraulics Type: Controlled by fore & aft movement of hand lever
STANDARD DIMENSIONS
* Length: 106.2"
* Width: 35.6"
* Height: 54.6"
* Height to Bucket Hinge Pin: 80.9"
* Length of Track on Ground: 41.4"
* Length without Attachment: 84.5"
* Length with Standard Bucket: 106.2"
* Width (with bucket): 3'
* Reach @ Maximum Height: 18.6"
* Dump Angle @ Maximum Height: 48.7 degree
* Ground Clearance: 8"
* Angle of Departure: 23.8 degree
All Rights Reserved | Northwest Implement
Powered by Sedona Technologies.